HW-G6 is 10 hp, grinding width 550mm, 3 grinding plates which can
hold total 9 pieces of tools.
HW-G6 supports both dry and wet grinding, with 30L water tank.
Application:
Grind and polish the concrete, terrazzo, marble and artificial
floor.
Floor surface preparation and renovations.
Remove paint, epoxy, coatings, glue and adhesives.
Level small area of uneven joints or high sports of 1/16 to 1/8
inch.
Parameters:
| Voltage | 220-240V ,1P/3phrase | 380V-440V, 3phrase |
| Frequency | 50/60HZ | 50/60HZ |
| Current | 20.3A | 11.7A |
| Power Output | 7.5hp(5.5KW) | 7.5hp(5.5KW) |
| Inverter power | 10hp(7.5KW) | 10hp(7.5KW) |
| Motor speed | 300-1600rpm | 300-1600rpm |
| Grinding width | 550mm | 550mm |
| Disc Dianeter | 230mm*3plate | 230mm*3plate |
| N.W | 190KG | 190KG |
| Water Tank | 30L | 30L |
| Dimension | 970*550*850mm | 970*550*850mm |
Features
It is driven by bell, together with gears.
The counter rotating plates provide balanced torque which prevents
the machine pull from left and right.
Hand can be adjusted 360 degree forward and backward.
Motor can run in two directions, which is better for diamond tools.
Inverter shows voltage and motor speed.
Contrast
HONWAY: Gear box is smooth and clean exquisite craftwork.
Others: Gear box is coarse even the dregs are left by parts
processing.
HONWAY: Bearing is NSK, made in Japan, famous bearing name.
Others: Chinese bearings, the quality is not as good as that of
Japan brand.
HONWAY: Famous brand TTO seal made in Taiwan.
Others: No brand. Not imported seal.
HONWAY: High quality rubber wheels because it not only support the
machine weight but also afford long time transportation.
Others: Common rubber wheels which can't bear heavy weight.
HONWAY: High strength steel. Hard, solid.
Others: Common strength steel. Even rust.
HONWAY: New Multi-function support frame system makes it easy to change the
abrasives.
Others: Difficult to change the abrasives.
Closer Look
Company introduction
Changsha Honway Machinery Co., Ltd is the Professional manufacturer
for floor scarifying & grinding & polishing machine in China.
1, Well equipped facilities for mechanical process.
2, Strict quality control throughout the stages of production.
3, A team of experienced technicians and workers.
4, All products are CE certified, comply with international
standard.
5, Covering a production area of 1000 square meter.
After Sell Service
- One year of warranty for machine.
- Honway always store the spare parts of old models, in case that the
machine needs repair in future.
- The spare parts can be sent out immediately at any time, delivered
by DHL.
- Honway will service you and your machines for years.
- All gear boxes are tested 48 hours before it leaves factory.
- If the customers visit our factory, we could provide the training
lessons.
- We always supply the spare parts for all the old models.
FAQ
Q: If your machine can be customized?
A: Yes, we can design and produce according to client’s requirements.
Q: What is your payment method?
A: 100% or 50% T/T advance, the balance should be paid before
shipment. (for old customers, we could discuss again)
Q: How about your delivery time?
A: 7~20 days (according to the order quantity)
