G5 is 600mm grinding width, 10hp, 220v or 380v voltage selectable, able to meet the demands of
different regions.
Square plate with four heads, 12 diamond pads, convenient and
smooth operation, high efficiency.
The motor is connected to gear box directly, so the motor power can
be 100% transmitted. When motor runs in low speed, the transmission
device enhances the torque of the rotating shaft, which improves
the grinding and polishing effect in different floors.
High strength aluminum alloy (gear box, solid, strong, good for
heat radiation).
Application:
Removing adhesive residues, mastics, epoxies, urethane, paint and
thick coatings;
Prepare concrete surfaces for epoxy coatings;
Grinding and polishing floors of concrete, stone, terrazzo, epoxy
and etc.
Parameters:
| Voltage | 220-240V ,1P/3phrase | 380V-440V, 3phrase |
| Frequency | 50/60HZ | 50/60HZ |
| Current | 27.0A | 15.6A |
| Power Output | 10hp(7.5KW) | 10hp(7.5KW) |
| Inverter power | 10hp(7.5KW) | 10hp(7.5KW) |
| Motor speed | 300-1800rpm | 300-1800rpm |
| Grinding width | 600mm | 600mm |
| Disc Dianeter | 320mm*4plate | 320mm*4plate |
| N.W | 265KG | 265KG |
| Water Tank | 30L | 30L |
| Dimension | 930*600*950mm | 930*600*950mm |
Features
Four grinding plates with 12 diamond pads offering high performance
and efficiency;
Handle is adjustable, effort saving and easy operation;
Motor rotation can be switched forward and reverse;
With pure copper motor, the machine’s dynamic is durable for a long
time;
Product Details
HW-G5 is a square design concrete grinding machine. It is driven by
gears and has four grinding plates. The grinding plates counter
rotates and cross running, would not leave trace on floor. 600mm
grinding width is wider than 580mm which is common in the market.
Key features
4 heads square plate has 12 diamond pads, very suitable for
pre-treating and leveling the concrete surface before epoxy
coating;
HW-G5 would not leave trace on floor when the four square plates
running cross;
Gear box is made totally by aluminum alloy, light but solid;
It is easier and more comfortable to operate than counter rotating
machine;
The working way can be forward and backward.
Closer Look
Production Flow
Company introduction
Changsha Honway Machinery Co., Ltd is the Professional manufacturer
for floor scarifying & grinding & polishing machine in China.
1, Well equipped facilities for mechanical process.
2, Strict quality control throughout the stages of production.
3, A team of experienced technicians and workers.
4, All products are CE certified, comply with international
standard.
5, Covering a production area of 1000 square meter.
PRE-SALE SERVICE
Once receive your question, we will offer you a total solution
We offer 7/24 hours online service(e-mail What. Facebook. Youtube
Twitter. etc)
Telephone and Mobile phone are also available. you can contact us
in everywhere and any-time
IN-SALE SERVICE
All the machines parts have pasted the quality control system
before, during and after manufacturing
We ensure that you ll receive the machines within 15 days
We ensure every single machine is in TOP quality before you get it
AFTER-SALE SERVICE
- One year of warranty for machine.
- Honway always store the spare parts of old models, in case that the
machine needs repair in future.
- The spare parts can be sent out immediately at any time, delivered
by DHL.
- Honway will service you and your machines for years.
- All gear boxes are tested 48 hours before it leaves factory.
- If the customers visit our factory, we could provide the training
lessons.
- We always supply the spare parts for all the old models.
FAQ
Q: If your machine can be customized?
A: Yes, we can design and produce according to client’s requirements.
Q: What is your payment method?
A: 100% or 50% T/T advance, the balance should be paid before
shipment. (for old customers, we could discuss again)
Q: How about your delivery time?
A: 7~20 days (according to the order quantity)
