G5 Uses a stable transmission device, the front fuselage is
connected to gear box directly, so the motor power can be 100%
transmitted. When motor runs in low speed, the transmission device
enhances the torque of the rotating shaft, which improves the
grinding and polishing effect in different floors. High strength
aluminum alloy (gear box, solid, strong, good for heat radiation)
Application:
Prepare concrete surfaces for epoxy coatings
Grinding and polishing floors of concrete, stone, terrazzo, epoxy
and etc.
Parameters:
| Voltage | 220-240V ,1P/3phrase | 380V-440V, 3phrase |
| Frequency | 50/60HZ | 50/60HZ |
| Current | 27.0A | 15.6A |
| Power Output | 10hp(7.5KW) | 10hp(7.5KW) |
| Inverter power | 10hp(7.5KW) | 10hp(7.5KW) |
| Motor speed | 300-1800rpm | 300-1800rpm |
| Grinding width | 600mm | 600mm |
| Disc Dianeter | 320mm*4plate | 320mm*4plate |
| N.W | 265KG | 265KG |
| Water Tank | 30L | 30L |
| Dimension | 930*600*950mm | 930*600*950mm |
Features
Four grinding plates offer high performance and efficiency
Adjustable long handle, effort saving and easy operation;
Forward and reverse switch for motor rotation.
With pure copper motor, the machine’s dynamic is durable for a long
time;
Product Details
HW-G5 is a square design concrete grinding machineIt is driven by
gears and has four grinding plates. Thegrinding plates counter
rotates, but would not leavetrace on floor. 600mm grinding width is
wider than580mm which is common in the market
Application
For coarse grinding, medium grinding, fine polishing.crystallizing,
preparation, maintenance of all kinds offloor. Remove painting,
coating, epoxy, urethane, gluepolyurethane, mastic with PCD tools
on all kinds of floor
Key features
4 heads square plate has 12 diamond pads, very suitable for
floorpreparation-leveling floor before epoxy resin
HW-G5 would not leave trace on floor when the four square
platessquare cross to work
Gear box is made totally by aluminum alloy, very durable and
reliable,
It is easier and more comfort to operate than counter rotating
machine
The working way can do forward and backward
PRE-SALE SERVICE
Once receive your question, we will offer you a total solution
We offer 7/24 hours online service(e-mail What. Facebook. Youtube
Twitter. etc)
Telephone and Mobile phone are also available. you can contact us
in everywhere and any-time
IN-SALE SERVICE
All the machines parts have pasted the quality control system
before, during and after manufacturing
We ensure that you ll receive the machines within 15 days
We ensure every single machine is in TOP quality before you get it
AFTER-SALE SERVIC
1 year warranty for the machines
Our strong R&D department offers immediate technology support
Topwell care service will follow you and your machine for years
Closer Look
Production Flow
Company introduction
Changsha Honway Machinery Co., Ltd is the Professional manufacturer
for floor scarifying & grinding & polishing machine in China.
1, Well equipped facilities for mechanical process.
2, Strict quality control throughout the stages of production.
3, A team of experienced technicians and workers.
4, All products are CE certified, comply with international
standard.
5, Covering a production area of 1000 square meter.
After Sell Service
- One year of warranty for machine.
- Honway always store the spare parts of old models, in case that the
machine needs repair in future.
- The spare parts can be sent out immediately at any time, delivered
by DHL.
- Honway will service you and your machines for years.
- All gear boxes are tested 48 hours before it leaves factory.
- If the customers visit our factory, we could provide the training
lessons.
- We always supply the spare parts for all the old models.
FAQ
Q: If your machine can be customized?
A: Yes, we can design and produce according to client’s requirements.
Q: What is your payment method?
A: 100% or 50% T/T advance, the balance should be paid before
shipment. (for old customers, we could discuss again)
Q: How about your delivery time?
A: 7~20 days (according to the order quantity)
