Terrazzo Floor Grinding Machines New Type Floor Tile
HW-G4, grinding width 500mm, 220v or 380v, 5.5hp. With 3 plates, 9
pieces of diamond tools, motor speed can be adjusted from 300-1600
rpm, simply through the rotation button on the control panel.
Application:
HW-G4 can be used for floor coarse grinding, medium grinding, fine polishing,
crystallizing, preparation, maintenance. It is not only applied for
concrete, but also for millstone, marble, granite, and terrazzo
floor.
Parameters
| Voltage | 220-240V ,1P/3phrase | 380V-440V, 3phrase |
| Frequency | 50/60HZ | 50/60HZ |
| Current | 15A | 11A |
| Power Output | 5.5 hp (4KW) | 5.5 hp (4KW) |
| Inverter power | 5.5 hp (4KW) | 5.5 hp (4KW) |
| Motor speed | 300-1600rpm | 300-1600rpm |
| Grinding width | 500mm | 500mm |
| Disc Dianeter | 200mm*3 plate | 200mm*3 plate |
| N.W | 191KG | 191KG |
| Water Tank | 20L | 20L |
| Dimension | 970*500*800mm | 970*500*800mm |
Features
Good quality electrical motor and inverter;
Completely driven by gears, gear box is made of aluminum alloy;
Motor is pure coppers wires inside, direction can be right and
left;
The structure of double bearing could prevent oil leaking;
Hand can be adjusted 360 degree forward and backward;
Water tank and dust proof shroud are both available.
Closer Look
Production Flow
Company introduction
Changsha Honway Machinery Co., Ltd is the professional manufacturer
for floor scarifying & grinding & polishing machine in China. We
are located in Changsha city which is well known as the capital of
construction machinery in China. This city has the abundant supply
of machinery engineers, workers, technique, workcraft, etc. Our
company develops here and builds up as a manufacturing the machines
for ‘Concrete Superflat floor’.
After Sell Service
- One year of warranty for machine.
- We always supply the consumables.
- We always supply the spare parts for all the old models.
- The spare parts can be sent out immediately at any time, delivered
by DHL.
- The CD and operation manual is sent with machine to guide the
installation process works and repair problems.
- All machines are tested, and the testing record will be kept,
before it leaves factory.
- If the customers visit our factory, we could provide the training
lessons.
FAQ
Q: Where is your factory?
A: It is located in Changsha, Hunan province. Welcome you come to our
factory and produce process at any time.
Q: What kind of machine you supply?
A: Concrete grinding machine, concrete scarifying machine, diamond
tools.
Q: What voltage of your machine?
A: 380V three phase,220V three phase and 220V single phase.
Q: What certificates of your machine?
A: 3C CE SGS
