Four Round Plate Gear Driven Marble Floor Grinding Machine with NSK
bearing and Taiwan Oil Seal
HW-G10 concrete grinder is a four head planetary machine, 12 diamond pads, convenient and smooth operation, high efficiency. The Grinding width is 650mm, 11hp, for 220v or 380v voltage selectable, able to meet the demands of different regions.
G10 has two visible advantages: one is it improves 30% working
productiveness than common grinding machine, as it is still
planetary design but has one more head; the other one is it avoids
the centrifugal pull which three planetary plates causes, and keeps
a balance between the plates; so one wouldn't feel the vibration
when the machine works.
Application:
Grinding and polishing floors of concrete, stone, terrazzo, epoxy
and etc.
Old Floor Removal, Restoration, Renovation.
Removal of old coatings and contaminates.
Parameters
| Voltage | 220-240V ,1P/3phrase | 380V-440V, 3phrase |
| Frequency | 50/60HZ | 50/60HZ |
| Current | 26.7A | 15.5A |
| Power Output | 10hp(7.5KW) | 10hp(7.5KW) |
| Inverter power | 15hp(11KW) | 15hp(11KW) |
| Motor speed | 300-1800rpm | 300-1800rpm |
| Grinding width | 650mm | 650mm |
| Disc Dianeter | 250mm*4plate | 250mm*4plate |
| N.W | 270KG | 270KG |
| Water Tank | 30L | 30L |
| Dimension | 970*650*950mm | 970*650*950mm |
Features
Middle size, for grinding and polishing middle to large area.
Forward and Reverse rotation switches.
Iron weight increases the weight and improves the grinding
efficiency.
Zinc alloy tap, solid and good quality, for wet grinding and
polishing.
Product Details
1, Up and down plates rotate in two directions like the planetary
and four down plates rotate crossly.
2, High strength aluminumalloy(gear box, solidstrong, good for
heatradiation)
When the gears work for a few hours, the enclosed gear box will be
get pressed and hot. The aluminum alloy is good for hard radiation
3, Super motor and inverter(assure the electricitysafety and
quality)
Motor and inverter are tested many times and long time working, in
which the quality is highly assured
4, The control panel is easy to understand and operate(you could
call it " foolish" operation)
5, The direction of button disk can be both clockwise and
anticlockwise
because diamond pad would be uneven if it always runs in one
direction. Unevenness will waste diamond
Closer Look
Company introduction
Changsha Honway Machinery Co., Ltd is the professional manufacturer
for floor scarifying & grinding & polishing machine in China. We
are located in Changsha city which is well known as the capital of
construction machinery in China. This city has the abundant supply
of machinery engineers, workers, technique, workcraft, etc. Our
company develops here and builds up as a manufacturing the machines
for ‘Concrete Superflat floor’.
After Sell Service
- One year of warranty for machine.
- We always supply the consumables.
- We always supply the spare parts for all the old models.
- The spare parts can be sent out immediately at any time, delivered
by DHL.
- The CD and operation manual is sent with machine to guide the
installation process works and repair problems.
- All machines are tested, and the testing record will be kept,
before it leaves factory.
- If the customers visit our factory, we could provide the training
lessons.
FAQ
Q: Where is your factory?
A: It is located in Changsha, Hunan province. Welcome you come to our
factory and produce process at any time.
Q: What kind of machine you supply?
A: Concrete grinding machine, concrete scarifying machine, diamond
tools.
Q: What voltage of your machine?
A: 380V three phase,220V three phase and 220V single phase.
Q: What certificates of your machine?
A: 3C CE SGS
